PLEASE NOTE: Online ordering is available but at this time, is only available for Local Pickup or Free Delivery (orders over $100.00) within 30 KM of Erin, Ontario. If outside of the 30 KM Radius, you will need to pick up your order at our store. If within the 30 KM radius, when  you check out, you will be given the option of Local Pickup or Free Delivery (with orders of over $100.00).

 

Please note that prices are subject to change without notice at this time. Due to severe product shortages, product availability may suddenly change. We reserve the right to substitute an item no longer available with one of equivalent quality.

Muresco Ceiling Paint

$18.05$231.00

A premium quality, acrylic coat ing that delivers excellent hide, rolls and sprays on smoothly, resists spatter and offers extended open time for an easier, more efficient application.

Ideal on most types of interior ceilings, including textured ceilings.

  • Provides a uniform flat finish that diffuses light and obscures minor imperfections
  • Excellent hide
  • Extended open time and spatter-resistant
  • Low VOC
  • Rolls or sprays easily

Available in Quart, Gallon, and 5 Gallon Sizes.

Clear
SKU: N/A Categories: ,

Description

Muresco Ceiling White – Recommended For:

Residential or commercial ceili ng applications where a premium quality finish is desired. For new or previously painted wallboard, wallpapered surfaces, acoustical ceiling tile, textured ceilings, cured masonry, plaster, and other ceiling substrates.

Limitations

  • Do not apply when air and surface temperatures are below 50 °F (10 °C).
  • Not for high traffic areas or surfaces that require frequent cleaning.

Muresco Ceiling White Surface Preparation

Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials, and mildew. Remove any peeling or scaling paint and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust.

New plaster or masonry surfaces must be allowed to cure (30 days) before applying base coat. Cured plaster should be hard, have a slight sheen and maximum pH of 10; soft, porous or powdery plaster indicates improper cure.

Never sand a plaster surface; knife off any protrusions and prime plaster before and after applying patching compound.

Poured or pre-cast concrete with a very smooth surface should be etched or abraded to promote adhesion, after removing all form release agents and curing compounds. Remove any powder or loose particles before priming.

Difficult Substrates: Benjamin Moore offers a number of specialty primers for use over difficult substrates such as bleeding woods, grease, crayon markings, hard glossy surfaces, galvanized metal, or other substrates where paint adhesion or stain suppression is a particular problem.

Headwaters Home Improvement Centre can recommend the right problem solving primer for your special needs.

Additional information

Size

Quart, Gallon, 5 Gallon

SDS & Technical PDF's

Muresco 25801 SDS (PDF)

Muresco 25804 SDS (PDF)

Muresco Ceiling White Technical Sheet (PDF)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.