PLEASE NOTE: Online ordering is available but at this time, is only available for Local Pickup or Free Delivery (orders over $100.00) within 30 KM of Erin, Ontario. If outside of the 30 KM Radius, you will need to pick up your order at our store. If within the 30 KM radius, when you check out, you will be given the option of Local Pickup or Free Delivery (with orders of over $100.00)
Tower Tech 2 Sealant
Tower Tech2 TM is a one-component, high-performance, gun-grade, Acrylic Urethane Elastomeric Sealant. Formulated from premium technology, reduces dirt pickup, eliminates yellowing and shiners. Internally plasticized resin requires no mixing or priming to bond to most materials, including concrete, wood and masonry. Tower Tech2 TM has superior adhesion, durability with 50% joint movement capability and 800% elongation. It forms a flexible, durable airtight, water-resistant seal offering exceptional protection. Once cured the bead is mildew resistant. Tower Tech2 TM is safe for UV exposure and will not discolor.
Available in 11 colours.
A new line of Acrylic Urethane sealants that meet the rigid requirements of ASTM C-920.
Available colours: White, Off White, Clear, Almond, Bronze, Gray, Limestone, Stone, Tan, Woodtone, Black.
10.1 Fluid Ounces (299 mL).
Features & Benefits:
- Ready to use: No mixing; reduces labor costs
- Joint movement capability ±25%: Flexibility provides long lasting water tight joints
- Easy to gun and tool: Speeds application and makes neater joints
- Standard colors: Matches popular materials and substrates
- Water Based: Easy clean-up
- Primer less application: Lowers installation costs
- Weather resistant: Produces long-lasting weather-tight seals
- Wide temperature-application range: Suitable for all climates
- Compatible with most coatings: May be painted acrylics and elastomeric coatings
- Low VOC content: Less exempt solvents 1.5%
- Siding – Wood, Vinyl, Aluminum
- Surfaces -Cement, Concrete, Hardboard
- Curtain Wall Construction
- Panel Walls
- Precast Units
- Window & Door Installation
- Vinyl Siding
- Expansion Joints
- Cement Board
- Vinyl Siding
- Interior and Exterior
- Above Grade
APPLICATION OF TOWER TECH2 TM SEALANT
Tower Tech2 TM is generally considered a non-priming sealant. It is the user’s responsibility to check the adhesion of the cured sealant on typical test joints at the project site before and during application consult Technical Services for additional information.
Surfaces to be caulked must be dry and free of all dirt, dust, oil, mildew, loose paint, old caulk, or other contaminants. Bare surfaces should be primed before caulking. Only apply when sealant, surface, and air temperatures are above 40° F and rising. Do not apply on surfaces that exceed 120°F, or when rain is expected.
Tower Tech2 TM comes ready to use. U-shaped joints should have the proper size backer rod or bond breaker tape installed to prevent 3 point adhesion. The sealant must reach the deepest point of the joint. Remove excess with a clean rag and water. Tooling the joint flush with a putty knife is recommended. Tooling results in the correct bead shape, a neat joint, and maximum adhesion. 90° joints can be tooled smooth with a moistened rag to a minimum bead size of 3/8”.
CURE TIME @ 75° F (24° C) 50% relative humidity Joint Size ½” X ¼”
Tooling Time: 15 Minutes
Tack Free Time: 60 Minutes
The cure of Tower Tech2 TM varies with temperature and humidity. Lower temperatures and humidity will extend curing times.
White, Clear, Almond, Bronze, Gray, Limestone, Off White, Stone, Tan, Woodtone, Black
Only logged in customers who have purchased this product may leave a review.