Tower Tub & Tile

Description

Product Description:

TUB & TILE is a quality siliconized acrylic adhesive caulk. It can be used on a wide variety of interior and exterior surfaces, delivering good adhesion and durability. TUB & TILE caulk forms a flexible, durable, airtight, water resistant seal that offers protection from environmental conditions and features an easy to clean bead.

Once cured, TUB & TILE caulk is mildew resistant and meets ASTM C-834. TUB & TILE caulk is designed to be used where an acrylic adhesive sealant is ideal for sealing or setting the following:

• Sinks,
• Showers,
• Counter Tops, and similar applications.

TUB & TILE caulk is easily cleaned with soap and water.

Tower TUB & TILE Performance Features:

• Meets ASTM C-834, Type OP, Grade -18ºC.
• Up to 1/2” in properly designed joints
• Paintable
• Cured bead is mildew resistant
• Provides a watertight seal
• Interior / Exterior
• 40-year guarantee

Suggested Applications:

• Sinks
• Tubs
• Showers
• Counter Tops

Suggested Substrates:

• Masonry
• Ceramic Tile
• Wood
• Concrete
• Glass
• Metal
• Porcelain
• Brick
• Marble

Surface Preparation:
Surfaces to be caulked must be dry and free of all dirt, dust, oil, mildew, loose paint, old caulk or other contaminates. Areas with existing mold or mildew should first be cleaned with a mild bleach solution.

Only apply when sealant, surface, and air temperature are above 40ºF and rising.

Do not apply on surfaces that exceed 120ºF, or when rain is expected.
Application:

1. Cut nozzle at a 45º angle. Cured bead should be between 1/8” and 1/2” wide. Use a foam backer rod for joints that exceed 1/2” in depth.
2. Smooth bead with a moistened cloth.
3. Clean up uncured material and tools with soap and water.
4. Allow 4 to 6 hours before painting.

Coverage 10.1 fl oz.: 55 linear feet for a 3/16” bead.

TEST PAINT FOR COMPATIBILITY. NOT INTENDED FOR AREAS THAT WILL BE SUBMERGED IN WATER. DO NOT USE ON MIRRORS. KEEP FROM FREEZING. NOT FOR FOOD CONTACT SURFACES.

Clean Up:

Immediately after use, clean uncured material and tools with soap and water. Remove cured sealant by cutting with a sharp-edged tool

WARNING! IRRITATING TO SKIN, EYES AND RESPIRATORY TRACT. Harmful if swallowed, inhaled or absorbed through the skin. May cause allergic skin reactions and/or central nervous system depression. Adverse reproduction effects have been reported in animals. May cause adverse kidney effects. Avoid contact with eyes, skin and clothing.

Use in well ventilated area. Wear eye, skin, and respiratory protection. Eye contact: Immediately flush with water for 15 minutes and get medical attention immediately.

If swallowed: Do not induce vomiting. Give large quantities of water and get medical attention. Never give anything by mouth to an unconscious person.

For health information, refer to Material Safety Data Sheet or call Chemtrec at 800-424-9300. KEEP OUT OF REACH OF CHILDREN

First Aid:

In case of skin contact, wash off quickly with plenty of soap and water and remove contaminated clothing. For eye contact, flush eyes immediately with large quantities of water for at least 15 minutes. If swallowed, obtain medical treatment immediately. DO NOT INDUCE VOMITING. If inhalation causes physical discomfort, move to fresh air. If
discomfort persists or any breathing difficulty occurs, seek medical help.

Material Safety Data Sheets (SDS) may be downloaded here or by calling 866-897-7568